SWDI 140C-DTH Plataforma de perfuração hidráulica de superfície integrada montada sobre esteiras e fundo de poço

SWMC based on long-term extensive research and customer feedback, and with nearly thirty years of drilling rig technology R&D experience, has launched the SWDI 140C-DTH integrated hydraulic drilling rig. It is equipped with a 19.5m3/20bar two-stage screw compressor, providing sufficient drilling pressure. The forward-designed slide center of gravity improves drilling axial pressure and drilling efficiency. Suitable for hole diameters ranging from 90-152mm, it is an efficient equipment for your construction projects.

Pergunte agora O que você acha do WhatsApp?

This machine is widely used in continuous mining of open-pit mines such as metallurgy, cement, coal mines, and quarries, as well as blasting hole drilling for construction projects like railways, highways, water conservancy, hydropower, and national defense.

O automatic rod handling device uses a Malta-style automatic rod handling method, which, compared to other rod handling designs, reduces one pin insertion auxiliary action, resulting in faster rod handling and easier operation. The drill rod magazine can hold 5+1 drill rods, with a maximum depth of 24 meters when using 4-meter drill rods. During the automatic rod handling process, a grease-lubricated thread system has been added to ensure the service life of the drill rods and reduce manual auxiliary operations.

O rotary reducer gearbox is a straight-tooth type, which is highly durable and allows for a 0-100 stepless rotary speed. The rotary reducer gearbox uses an Eaton hydraulic motor, with a floating buffer joint added to reduce thread wear caused by frequent drill rod disassembly, extending the service life of the drill rods by more than 2 times. It also reduces the impact reaction force of drilling and ensures the gearbox's service life.

The abundant power system uses a Yuchai turbocharged water-cooled engine, allowing for low-speed operation and reduced fuel consumption. During drilling operations, it can meet a speed no higher than 1800r/min and comply with current emission standards.

ESPECIFICAÇÕES PRINCIPAIS

Diâmetro do furo de perfuração	90-152 mm
Pressão de ar de trabalho	2.0 Mpa
Torque de giro	2288N.m
Velocidade de giro	0-100 Rpm
Força de elevação	20KN
Balanço de estrutura deslizante	Left 90°/Right 31°
Inclinação do quadro deslizante	147°
Balanço da lança de perfuração	Left/Right 35°
Lançamento da lança de perfuração	horizontal 55°/23°
Drilling pipe diameter	76 mm/ 89mm
Length of drilling pipe	4000 mm/3000 mm
Number of drilling pipe	5+1
Drilling depth	24m/18m
Capacidade de classificação	35°
Fabricante do motor	YUCHAI Diesel Tier 3
Potência nominal	228 Kw
Dimensão	1000026003700 mm
Peso	12000 kgs